Fedora 20
Sponsored Link

DHCP Server
2013/12/19
 
Configure DHCP ( Dynamic Host Configuration Protocol ) Server. If you make your linux computer DHCP server, it's neccesarry to disable DHCP function on router in LAN.
[1] Install and configure DHCP Server
[root@dlp ~]#
yum -y install dhcp
[root@dlp ~]#
vi /etc/dhcp/dhcpd.conf
# add lines like below

# specify domain name

option domain-name
"srv.world";
# specify DNS's hostname or IP address

option domain-name-servers
dlp.srv.world;
# default lease time

default-lease-time 600;
# max lease time

max-lease-time 7200;
# this DHCP server to be declared valid

authoritative;
# specify network address and subnet mask

subnet 10.0.0.0 netmask 255.255.255.0 {
# specify the range of lease IP address

range dynamic-bootp 10.0.0.200 10.0.0.254;

# specify broadcast address

option broadcast-address 10.0.0.255;

# specify default gateway

option routers 10.0.0.1;

}
[root@dlp ~]#
systemctl start dhcpd.service

[root@dlp ~]#
systemctl enable dhcpd.service

[2] Configure on client. This example is on Windows 7. Open Network settings and go to the sacreen like below.
 
[3] Check boxes like below, then IP address is re-configured automatically.
 
[4] See the network status. Automatical configuration is done.
 
 
Tweet